X:Sider 15 Amp
Description
Details
Overview
The X:SIDER series offers an effective and reliable solution for a wide range of professional applications -from medium to large events. The system consists of a sturdy but lightweight trapezoidal satellite which can be paired with a massive 2×18 sub. Both have dedicated digital amplifiers with their own DSP, and can be rack mounted.
X:SIDER 15 AMP has been created as a horizontal array system or as a support array, where coverage can be perfectly determined by the number of satellites being used. Thanks to the modularity of X:SIDER 15 AMP you can build a system suitable for any situation. For additional horizontal coverage, simply add satellites and to optimize the response at low frequencies, add multiple sub units.
The amplifiers are equipped with a remote-control interface so you can keep the whole system under control at all times – making corrections to the acoustics as the event may require.
To complete your VERSE system, we’ve developed and designed all the necessary hardware for hanging and installing the satellites – with an exclusive ultra-fast coupling system; the subwoofer is equipped with a handy removable rack for easy transport.
X:SIDER15 Amp
Output Power 2 x 1050 Watt @ 8Ω (EIAJ test – 1kHz, 1% THD) , 2 x 570
Watt @ 16Ω (EIAJ test – 1kHz, 1% THD)
Damping factor 20 Hz – 1000 Hz > 200
Distortion <0.5% (THD, DIM, SMPTE)
Active protective
circuitry
power limiting, thermal shutdown, short-circuit / overload
output protection
PREAMPLIFIER
Description DSP based (eq, x-over,comp,delay, limit), 24 bit convertion,
48 KHz sampling
Input sensitivity 0 dBu
Crossover frequency 1000 Hz
Subsonic filter yes
Active protective
circuitry
clip limiter, signal limiter
Nominal inpedance 15 kOhm balanced to ground
DIMENSIONS
H x W x D 88 (2U) x 241.5 x 350 mm
Weight 5 Kg
CONTROL PANEL
Level from -Inf to 0 dB
Controls (3 pushes with
led)
CLUSTER (for use side by side), H. PASS (high pass filter),
USER
Indication leds 1 green led = On/Off
2 green leds = Signal on low/high
2 red leds = Compression low/high
2 red leds = Protection low/high
1 red led = Temperature
CONNECTORS
1 XLR female input signal
1 XLR male link signal
2 RJ45 input/output RS485
1 Neutrik Speakon NL4MP: 1+ Low+, 1- Low-, 2+ High+,
2- High1 Neutrik Powercon NAC3MPA AC IN
1 Neutrik Powercon NAC3MPB AC OUT
| Peso | Kg 5 |
|---|---|
| Dimensioni | cm 24,1 x 8,8 x 35 |
| Materiali |
