V4.350
Description
Active four channel digital amplifier. Continuous power: 4×200 Watts at 8 ohms – 4×330 Watts at 4 ohms – 2×600 Watts at 8 ohms (Bridged mono mode)
4 channels
Class D amplifier
Frequency range: 20-20,000 Hz (+0dB +/-3 dB)
LED diode
Connection: balanced XLR-F / 1/4″ Combo
Rack format
Weight: 7.9 kg
SPECIFICATIONS
Output Power – Stereo Mode – 20 Hz – 20 kHz, @ 0.1%THD 8 ohm channel (EIAJ): 4×180 W
4 ohm channel (EIAJ): 4×250 W
Output Power – Bridge Mono Mode – 1 kHz, @0.1% THD 8 ohm (EIAJ): 4×500 W
Distortion (SMPTE-IM) < 0.05% Frequency Response 20 Hz-20 kHz +/-1 dB, -3 dB point: 10 Hz-60 kHz Damping Factor, 1kHz, 0.1%THD(EIAJ) > 300 @ 8 ohms
Signal to Noise, 20Hz-20kHz 90 dB
Voltage Gain 40 x (32 dB)
Input Sensitivity @ 4ohms 1 Vrms
Input Clipping 10 Vrms (+22 dB)
Input Impedance 10 Kohm unbalanced, 20 Kohm balanced
Controls Front: AC Switch, Ch1 – Ch8 Gain Knobs
Rear: Mode Switches
Indicators Power – On: Blue LED, Protection: Red LED, Signal: LED Green, Clip: Red LED, Parallel-input: Yellow LED, Bridge: Yellow LED
Connectors, each Channel Input: Terminal Block
Output: Screw-terminal Barrier Block
Cooling Continuously variable-speed fan, front-to-rear air flow
Load Protection On / Off muting, overheat & short circuit protection
Power Supply 220-240 (110-120) Vac 50-60 Hz
Dimensions (h x w x d) 15.9’ (40.3 cm) (D) * 3.5’(8.9 cm) (H) * 19.02’ (48.3 cm)(L)
Weight (Kg) 17
| Peso | |
|---|---|
| Dimensioni | |
| Materiali |
