| Controls |
- Upper Panel: Volume, Keyclick, Crosstalk, Reverb, Rotary/Amp Gain, Volume Soft/Normal, Vibrato Upper On/Off, Vibrato Lower On/Off, 2 sets of Upper drawbars, 2 sets of Lower drawbars, 2 Pedals drawbars, Percussion Volume, Percussion Decay, Pedals Sustain, Percussion On/Off, Percussion Volume Soft/Normal, Percussion Decay Fast/Slow, Percussion Harmonic 2nd/3rd, Percussion Volume (fine control), Percussion Decay (fine control)
-Side Panels: programming section with 128x64 pixel OLED display, buttons for the Tonewheels, Pipe and Transistor selection, pitch bender, RotaryAmp Bypass, additional effects selector with knob for direct access to the regulation screen, FX On, Amount and Rate controls for additional effects, Tap tempo, Bass / Middle / Treble Eq master, Pedals Model, Pedals Lock, Pedals Split, Pedals To Lower
- Speed control lever of the internal Rotary effect (or of the external rotary speaker eventually connected)
|
| Drawbars - Upper |
2 sets of nine drawbars: 16' - 5 1/3' - 8' - 4' - 2 2/3' - 2' - 1 3/5' - 1 1/3' - 1'
|
| Drawbars - Lower |
2 sets of nine drawbars: 16' - 5 1/3' - 8' - 4' - 2 2/3' - 2' - 1 3/5' - 1 1/3' - 1'
|
| Drawbars - Upper Preset |
9 presets on Black Octave different for Tonewheels, Pipe, Transistor models
|
| Drawbars - Lower Preset |
9 presets on Black Octave different for Tonewheels, Pipe, Transistor models
|
| Drawbars - Pedals |
2 drawbars: 16' & 8'
|
| Midi In, Out, Thru |
In, Out with Soft-Thru option, Pedalboard In, MIDI on USB
|
| Data Memory |
128 programs
|
| Programming functions |
Output Destination for each manual, pedalboard and Left Hand.
Preset selection of V/C, Rotary/Amp and Reverb.
Preset selection and adjustment of the main parameters of the additional effects.
Configuration of the manuals for Gospel Mode, Lower Left Hand, 1st-9th Contacts Position.
Configuration of the pedalboard for Lock Mode, Pedals to Lower, To Lower Mode, Thud Mode.
Transpose, Fine Tuning, Equalizer settings, AO-28 Tone Control, Aux In Insert, Aux Out Volume knob on/off, Pedals Function / Polarity / Type / Calibration, MIDI settings, Program Recall settings.
Confirm Program selection, Display contrast, Led intensity, USB Device mode, USB Audio Level, Memory Lock, Auto Power Off time, Save & Load file, Factory Reset, OS Update.
|
| Connections |
Audio Out: Main L/Mono & R Line Out 6.35 mm jack (with selection of the signal source), Pedals Out 6.35 mm jack (direct pedalboard signal), 2 Aux Out 6.35 mm jack, 11 pin Rotary Speaker, 1 headphone output 6.35 mm jack
Audio In: 2 Aux In 6.35 mm jack (with selection of the insert point and input sensitivity), Analog In 3.5 mm stereo minijack
Pedal: Expression TRS/RTS 6.35 mm jack, Foot Controller TRS/RTS 6.35 mm jack, 2 Foot Switch NO/NC 6.35 mm jack, Rotary Footswitch (speed control) NO/NC 6.35 mm jack, USB to Host; USB to Device.
|
