Viscount International: the Art of Sound!

Studio Monitor M1

The accurate design of the M1 creates a high-resolution stereo monitoring system in any environment. You immediately notice the seamless, natural response delivered by the high precision woofers and tweeters. Each component is driven by a separate amplifier, and a crossover frequency of 1.2kHz @ 24/dB oct maximizes the efficiency of both drivers. The system delivers even frequency reproduction from 40Hz – 20kHz.

Download the brochure for further details
Sign Up for support and updates

Description

Details

INTRODUCTION

The VERSE M1 Monitor provides ultra-linear frequency response from 40Hz to 20kHz. Due to their high-resolution performance, these bi-amplified reference studio monitors are perfect for near-field monitoring applications: from mixing environments to multi-channel surround setups. The M1 monitors come equipped with dedicated switches to adapt the monitor’s low and high-frequency characteristics to ensure an optimal performance in any listening environment. A particular care has been paid in the choice of the tweeter, the latter of new conception, capable of fixing the resonant frequency at only 600Hz with a sensitivity of 95 dB @ 1W/1m. This tweeter gives a unparalleled clarity and cleanliness of sound at the system . Strict quality control on manufacturing of M1 active monitors is an essential part in guaranteeing a long lasting performance. Every M1 studio monitor speaker is built in Italy under continuous controls, each monitor is thoroughly tested and individually calibrated before packing.

Specifications

Specifications

_____SPECIFICATIONS (Available=●)

 


Type Monitor
Frequency response ±2 dB 42 Hz - 16kHz
±3 dB 40 Hz - 20kHz
Input Impedance 15 Kohm balanced
Input Sensitivity 0dBu (0.775 V)
Cross-Over 1.3 kHz (Linkwitz - Riley 24 dB/oct)
Subsonic Filter -3 dB @ 28 Hz
Peak SPL 115dB(Peak)
Max SPL (Calculated) 109 dB (Averaged)
Power 140 Wrms
WOOFER 166 mm (6 1/2"), 1.5" voice coil Kapton former - Progressive wave Konex spider - Ventilated magnet to reduce power compression
TWEETER 1.1” voice coil aluminium former and flat aluminium wire - Treated silk dome with additional damping treatment - Neodymium magnet circuit with damping material inside - Cooling radiator to reduce power compression
Noise <40 uVrms unweighted
Protective Circuitry Over current, over temperature, over voltage
_____INTERFACE

 


Inputs COMBO
_____CONTROL PANEL

 


Control Panel - Volume control
-On Energy save led
- Automatic energy save on/off button ( When the button is pushed the energy save function is disabled and the led on top is always green. When the button is pulled the energy save function is activated, if the input signal is off for about half an hour the amplifier is turned off, the consumption is <1 W, the led becomes red; as soon as the input signal turns on the loudspeaker comes out from the energy save state )
Led Indicators - Signal
- peak led
Dip Switch

- Bass roll-off four steps (flat, 40 Hz, 60 Hz, 80Hz)

- Bass tilt in four steps (flat, +2 dB, -4 dB, -2 dB)

- Mid tilt in four steps (flat, +2 dB, -4 dB, -2 dB)

- Treble tilt in four steps (flat, +2 dB, -4 dB, -2 dB)

Dimensions (WxHxD) 225 x 370 x 275 mm / 8.86 x 14.57 x 10.83 in
Colours / Finishes Black painted
Weight 4.5 Kg / 9,2 Lb

Reviews

Details

INTERFACE

Main Controls are easily accessible from the front of the monitor

When the button is pushed the energy save function is disabled and the led on top is always green. When the button is pulled the energy save function is activated, if the input signal is off for about half an hour the amplifier is turned off, the consumption is < 0,5 W, the led becomes red; as soon as the input signal turns on the loudspeaker comes out from the energy save state.

Support